• 16 input x 8 output configuration
  • Compact, floor-based or rack-mountable design
  • High resolution 24 bit / 96 kHz audio quality
  • Remote controllable preamps using an S-4000R or free RCS software
  • REAC low latency digital audio transmission system
  • Easy and affordable splits and recording options

Kompakt, Digital Snake rendszer

The S-1608 and S-0816 Digital Snake are compact versions of the popular S-4000 Digital Snake System. Easy to use and quick to install, the S-1608 Digital Snake System is a small format audio snake solution that offers the highest quality audio signal available in a portable snake system. The S-1608 Digital Snake system is ideal for bands, corporate A/V events, seminars, rental and staging houses, Houses of Worship and broadcasters that need the best possible sound quality from their audio without the high frequency losses and bulk of an analog snake.

REAC Technology
The REAC (Roland Ethernet Audio Communication) protocol is an industry proven, low latency, high quality 24 bit/ 96 kHz audio transport protocol used by the S-1608 and S-0816. The REAC protocol allows the Digital Snake’s signal to be “split” to as many positions as required such as monitor, broadcast and recording splits using the S-4000-SP or any standard gigabit Ethernet switch.

High Resolution Sound Quality
By placing high quality mic-pres on stage, the sound is amplified and converted at the closest point to the sound source, providing the best possible quality audio. The mic preamps can be controlled using the S-4000R or the free PC/Mac RCS software. By using Cat5e cable instead of large multi-core copper cable, the S-1608 Digital Snake system is immune to the “hums and buzzes” caused by electrical noise and ground issues and the high frequency losses inherent in analog snakes.

Easy Expansion for the S-4000 Digital Snake System
The S-1608 Digital Snake System can be used to easily expand the channel count of an S-4000 32 x 8 Digital Snake System to 48 x 16. Mix and match S-4000 and S-1608 Digital Snake Systems for customizable rental and installation systems.

Create Multiple Stage Configurations
Use multiple S-1608 Digital Snake Systems to create flexible stage configurations such as Left, Right and Center snake positions. Simply run Cat5e cables to the Front of House console for easy cable management on stage.

Split the S-1608 Digital Snake Easily for Monitoring, Broadcasting, or Recoding Applications
With the S-1608 Digital Snake system, the source audio can be digitally split using the S-4000-SP or any standard Ethernet switch. These loss-less digital splits can be routed over CAT5 cable to a monitoring console or a broadcast truck for recording.

Example Configurations


A typical 16x8 system would include
1 S-1608 at the Stage
1 S-0816 at FOH
1 S-4000R Remote Controller
1 SC-PACK including
SC-W100S 100 Meter Cat5e Cable plus all of the cabling for the inputs and outputs of the S-1608 and S-0816
View PDF


View PDF


View PDF



Number of Channels
S-1608 : 16 in 8 out S-0816 : 8 in 16 out
AD and DA Conversion
24 bit / 96 kHz
Frequency Response
-2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
Total Harmonic Distortion + Noise
0.05 % or less (Pad: On, Input Gain: +4 dBu, 22Hz to 20 kHz)
Dynamic Range
110 dB
Cross Talk
-80 dB or less (Input Gain: +4 dBu, typ.)
Nominal Input Level
-65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)
20 dB On/Off
Input Impedance
14 k ohms
Nominal Output Level
+4 dBu, Max. +22 dBu
Output Impedance
600 ohms
Recommended Load Impedance
10 k ohms or greater
Residual Noise Level (IHF-A, typ.)
-80 dBu or less
Equivalent Input Noise Level
S-1608: -128 dB S-0816: -124dB
Network Latency
375 microseconds when using REAC cable only (*1) (AD > REAC > DA Latency: approx 1.2 ms)
S-1608 : Analog Input x 16 (XLR type, balanced, phantom power) Analog Output x 8 (XLR type, balanced) Digital Output connector x 1 (Optical type) REAC Connector x 1 (RJ-45 EtherCon type) Remote Connector x 1 (RS-232C, DB-9 type) S-0816 : Analog Input x 8 (XLR type, balanced, phantom power) Analog Output x 16 (XLR type, balanced) Digital Output connector x 1 (Optical type) REAC Connector x 1 (RJ-45 EtherCon type) Remote Connector x 1 (RS-232C, DB-9 type)
POWER Indicator x 1, REAC Indicator x 1, REMOTE Indicator x 1, MUTE ALL OUTPUTS Indicator x 1
Power Supply
AC 115 V, AC 117 V, AC 220 V, AC 230 V, AC 240 V (50/60 Hz)
Power Comsumption
Phantom Power
+48 V / 14 mA (each input, remote controlled)
Operation Temperature
0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit
Power Cord x 1, REAC Connector Cover x 1, Ferrite Cores x 1 Rubber Foot x 4, Rack Mount Kit x 1, Owner's Manual
Size and Weight
401 mm
15-13/16 inches
135 mm
5-3/8 inches
177 mm
7 inches
5.5 kg
12 lbs. 3 oz.
*The specifications are subject to change without notice.



Impresszum  ::  Jogi nyilatkozat

Copyright © Roland East Europe Kft. 2008. Minden jog fenntartva.